How to Assemble the 3-Clip or 6-Clip Show-N-Sell

1. Choose 3 or 6 uninflated 18" foils.
   
   
2. Open a 3-Clip (#94300) or 6-Clip Show-N-Sell (# 94600) kit.
   
   
3. Turn a foil, so the side with the “hole-in-tail” is face down.
   
   
4. Remove pink lining from the adhesive on a Clip.
   
   
5. Firmly press Clip onto centre of the foil (keeping long side of clip toward foil tail)
   
   
6. Remove white lining from long Tape and center over short side of Clip (like a Band-Aid). Press into place.
   
   
7. Repeat steps 3-6 with remaining foils.
   
   
8. Inflate each foil with air – SLOWLY!!!! For best results use the Foil-Flator/deflator (#10700).
   
   
9. Avoiding wrinkles, place piece of clear tape over each “hole-in-tail” and fold/tape tail to back of foil.
   
   
10. Push Clip onto the black rod. Slide/turn to desired position.

Note:

• Tie line or loop LoopLine from the black rod ring to the ring of a ClikMagnet. Suspend from metal on the ceiling with a MagMover and Magpole.
• 6-Clip kits can be connected together by winding the ring of one pole into the ring of another – creating displays of 12, 18, 24 or more foils.
• Consider hanging a “pricing” sign from bottom ring in pole
• To change foil designs: re-use the pole and Clips and apply fresh tape from a bag of Show-N-Sell Replacement Tape (#94000)
• Want the display to hang at a desired height? Click here to determine line length using your MagPole.