How to Determine Line Length

How to Determine Line Length for a Ceiling Display

1. Extend the MagPole to touch the ceiling.
2. Visualize a “spot” on the pole where the bottom of the displayed item should hang (e.g. halfway between the two upper seams on the pole).
3. Lay the extended pole on the floor, with the top of the pole touching a wall.
4. Make a mark (masking tape?) on the floor at the visualized “spot”.
5. Close the MagPole.
6. Place the bottom of the object on the mark.
7. The length of LoopLine will be the distance from the top of the object to the wall.

Hint: To keep all future displays consistent, place a permanent mark on the floor at the visualized “spot”.

Note: The distance between the holes in the MagPole sections is 6 inches = 3 loops of LoopLine.

Download PDF instruction sheets

Air-Filled Arch Overview

How to Measure Line for an Air-Filled Arch

Recipe: (Latex) Cluster Arch

Recipe: Foil Heart Arch

Recipe: (Foil Balloon) Chains of Love Backdrop A

Recipe: (Foil Balloon) Chains of Love Backdrop B