One Button Pole

Extension pole. Extends from 4'6" to 8'.

The One Button Pole is a sturdy 2 section, 1 push-button telescopic extension pole with a fiberglass handle. The end tip has the Acme thread to fit into the Sliding MagMover 24” PRO.

It closes to 4’6”/1.4m and opens to 8ft/2.4m. Using the reach of the body, the fully extended One Button Pole can meet the metal on ceilings with a height of 13’/3.96m.

The One Button Pole is used to extend the reach of a person. With a Sliding MagMover 24” PRO attached, the extended One Button Pole makes it easy to attach and remove ClikMagnet (+ display) to/from low ceilings, while standing on the floor.

Weight with shipping tube: (2.25 lb/1.02 kg)

Item #11702
Regular price
$52.00
Sale price
$52.00
Regular price
Sold out
Unit price
per 
each
- +
Discount Applied in Cart

Clik-Clik products to USA residents are only available through USA distributors.

View Our Distributor List

  • Description
  • Safety
  • Reviews

What It Does

One Button Poles are push button telescopic extension poles with the standard Acme thread to fit into the MagMover. They are used to extend the reach of a person.

With the MagMover attached, the extended One Button Pole makes it easy to attach and remove ClikMagnets to/from ceiling heights not normally reached while standing on the floor.

How to Use the One Button Pole to Install Displays to the Metal on Ceilings

  1. With a MagMover threaded onto the end of the One Button Pole, hold the One Button Pole in a vertical position…with the base resting on the floor.
  2. Place the ClikMagnet(s) (+ display) onto the MagMover.
  3. While keeping the base on the floor and the One Button Pole vertical, extend the section to the desired height - as shown.
  4. Lift the One Button Pole (+ display) to allow the ClikMagnet(s) to ‘clik’ to the metal. Your display is hung!
  5. With the One Button Pole in a vertical position, set the base on the floor and gently close the opened section.
  6. Repeat for the next installation.

How to Use the One Button Pole to Safely Retrieve Displays from the Ceiling.

  1. With a MagMover threaded onto the end of the One Button Pole, hold the One Button Pole in a vertical position…with the base resting on the floor.
  2. Rotate outward the MagMover’s corkscrews.
  3. While keeping the base on the floor and the One Button Pole vertical, extend the section to the desired height.
  4. Lift the One Button Pole and insert the corkscrew(s) fully into the ClikMagnet’s centre ring(s). Pull.
  5. With the One Button Pole, still in a vertical position, rest the base on the floor. Gently close the extended section. Your display is retrieved!
  6. Next: Remove the ClikMagnet(s) and their attached LoopLine™ from the display. These are ready to be re-used for the installation of the next display.

It is important to position yourself closely under the display when taking it down, this is the easiest way to retrieve a display - as shown.

How to Use the One Button Pole to Determine the Length of the Connecting Line between the Display and the ClikMagnet.

  1. With the One Button Pole in a vertical position, extend the pole to touch the ceiling. Hold at the ceiling.
  2. Visualize a spot on the One Button Pole where the top of your display would be, when hanging from the ceiling. Do not close the section.
  3. Return the base to the floor and gently lay the extended One Button Pole onto the floor.
  4. Using LoopLine™ measure the distance from the visualized spot, to the tip of the One Button Pole.
  5. This distance is the length of line required to hang your display at the desired position from the ceiling.

How to hold a One Button Pole

Avoid power lines. Keep the One Button Pole a minimum of 10′ (3 m) away from any electrical wiring. Always use and hold the One Button Pole in a vertical position!

Customer Reviews

Based on 6 reviews Write a review
Your cart
loading

Your cart is currently empty.

Continue shopping