1-866-298-9684 Questions? Call Us

Sliding MagMover 24" PRO #12402

Item #12402
For items with 2 attachment points.

Item #12402
For items with 2 attachment points.

The Sliding Dual MagMover 24” PRO is used to hold two ClikMagnets (+ display) while being lifted to the metal on the ceiling and to safely retrieve them (+ display).

The Sliding Dual MagMover 24” PRO is usually used for the installation/retrieval of displays with two attachment points to a low ceiling.

The two posts on the Sliding Dual MagMover 24” PRO are movable to be positioned at infinite spacing between 4.5”/11.43cm and 24”/61cm apart.

Weight per bag: (.79 lb/.36 kg)

$78 each
Quantity - +

Clik-Clik products to USA residents are only available through USA distributors.

View Our Distributor List

Tools to complete the Clik-Clik System

Clik-Clik Magmover

Why Sliding MagMover posts?

Posts can be moved to match the distance between attachment points of the item to be hung (less than 24”/61cm).

The Sliding Dual MagMover 24” PRO has the standard Acme thread for attachment to the MagPole or most other threaded poles for installation/retrieval at great heights and on lower ceilings...while standing on the floor.

Product Description:

  • Has two moveable MagMover ‘posts’; each with a corkscrew
  • Made of sturdy aluminium
  • Threaded handle fits most Acme threaded poles
  • Light weight
  • Patented
  • Re-usable - over and over again
  • Installation of ClikMagnets (+ display item) to any position in a 360 degree radius (metal being present)
  • Has the additional benefit of also functioning as the Dual MagMover 6” and the Dual MagMover 24”

How to use the Sliding Dual MagMover 24” PRO to Install Flush-Mount Displays with Two Attachment Points – to the Metal on Low Ceilings.

  1. Open two FlushMount Clips by pinching. Feed one through a centre ring of the ClikMagnet + an attachment point in the display. Pinch to close. Repeat with the second FlushMount Clip.
  2. Thread the Sliding Dual MagMover 24” PRO onto a One Button Pole or any other extension pole.
  3. Adjust the distance between the posts of the Sliding MagMover 24”PRO to the distance between the attachment points of the display.
  4. Place each ClikMagnet’s centre ring (+ display) onto the orange side of the posts of the Sliding MagMover 24” PRO - as shown.
  5. Lift both ClikMagnets (for one “clik”) to the metal on the ceiling. Your display is hung!
Clik Clik ClikMagnet Placement
Magmovers Safely Remove ClikMagnets

How to use the Sliding Dual MagMover 24” PRO to Safely Retrieve Flush-Mount Displays from Low Ceilings.

  1. Thread the Sliding Dual MagMover 24” PRO onto a One Button Pole or any other threaded pole.
  2. Slide the posts of the Sliding Dual MagMover 24” PRO to the distance between the attachment points of the display.
  3. Rotate the corkscrews outward.
  4. Insert both corkscrew fully into the centre rings of both ClikMagnets with one motion.
  5. Pull downward. Your display is retrieved. The coils of the corkscrews will hold the ClikMagnets (+ display) from falling.

Note: For easy take down stand close to the underside of the display.

Note: Remove, from the display, the FlushMount Clips with their ClikMagnets. These are ready to be re-used on the next display.

How to Use FlushMount Clips

The Clik-Clik System

French (Français) | German (Deutsch) | Russian (русский)

Clik-Clik 4 Step Brochure

Clik-Clik 4-Step Brochure

English | French (Français)| Russian (русский) | German (Deutsche)

The Ontario Health and Safety Act States: A lifting device shall be operated in such a way that, no part of the load passes over any worker. This is good advice for all workers. It is natural to lift the MagMover to the front while visually searching for the installation placement spot.

Welcome to Clik-Clik Systems

Select your region below to get started.

Canada United States
To purchase, choose a USA distributor.
International