- Description
- Safety
- Reviews
What It Does
MagPoles are push-button, telescopic extension poles with the standard acme thread to fit into the MagMover. They are used to extend the reach of a person.
With the MagMover attached, the extended MagPole makes it easy to attach and remove ClikMagnets to/from ceiling heights not normally reached while standing on the floor.
How to Use the MagPole to Install Displays to the Metal on Ceiling.
- With a MagMover threaded onto the end of the MagPole, hold the MagPole in a vertical position…with the base resting on the floor - as shown.
- Place the ClikMagnet(s) (+ display) onto the MagMover.
- While keeping the base on the floor and the MagPole vertical, extend the sections to the desired height.
- Lift the MagPole (+ display) to allow the ClikMagnet(s) to ‘clik’ to the metal. Your display is hung!
- With the MagPole in a vertical position, set the base on the floor and gently close the opened sections.
- Repeat for the next installation.
How to Use the MagPole to Safely Retreive Displays from the Ceiling.
- With a MagMover threaded onto the end of the MagPole, hold the MagPole in a vertical position…with the base resting on the floor.
- Rotate outward the MagMover’s corkscrews.
- While keeping the base on the floor and the MagPole vertical, extend the sections to the desired height.
- Insert the corkscrew(s) fully into the ClikMagnet’s centre ring(s). Pull.
- With the MagPole still in a vertical position, rest the base on the floor. Gently close the extended sections. Your display is retrieved!
- Next: Remove the ClikMagnet(s) and their attached LoopLine™ from the display. They are ready to be re-used for the installation of the next display.
It is important to position yourself closely under the display when taking it down, this is the easiest way to retrieve a display - as shown.
How to Use the MagPole to Determine the Length of the Connecting Line between the Display and the ClikMagnet.
- With the MagPole in a vertical position, extend the MagPole to touch the ceiling. Hold at the ceiling.
- Visualize a spot on the MagPole where the top of your display would be when hanging from the ceiling. Do not close the sections.
- Return the base to the floor and lie the extended MagPole on the floor.
- Using LoopLine™ measure the distance from the visualized spot, to the tip of the MagPole.
- The measured distance is the length of line required to hang your display at the desired position from the ceiling.
How to hold a MagPole
Avoid power lines. Keep the MagPole a minimum of 10′ (3 m) away from any electrical wiring. Always use and hold the MagPole in a vertical position!