Click to enlarge
How it works
Previous product
LoopLine Clear (100m/328ft)
$30.80
Back to products Back to products
Next product
Super ClikMagnets Black $46.20

Round ClikMagnets #20

$59.40

10/bag

Ceiling Magnet. Holds up to 20lbs/9kg

These neodymium Round ClikMagnets #20 with one ring, “clik” to any metal that contains iron. They are ideal for attaching to the T-bars of most suspended ceilings, to industrial ceilings, and to the metal inside suspended FlatHats.

Caution: STRONG MAGNETS. Handle with care to avoid injury.

Magnet Dimensions: 1” x 1” x 1.5”
Weight/bag: (.33 lb/.15 kg)


    Add to wishlist
    SKU: 95600  All Products,ClikMagnets,Hanging Signs Accessories
    • Description
    • Safety
    • Reviews

    How to Choose the ClikMagnet for your Project:

    Choose by:

    1. Weight of the display to be hung.

    Product Description:

    • Plastic coated - no damage to ceilings.
    • Re-usable – over and over again.
    • Magnetic attraction is maintained over time. It does not lose power as a battery can.
    • Removable from metal with a mechanical force.

    Colour: White. For identification, there is a thin red line around the magnet face (not visible when on the metal).

    Important Factors

    Three factors determine any magnet’s strength.

    • Amount of iron in the metal.
    • Direction of pull.
    • Amount of paint, dirt or bumps etc. on the metal.

    Note: It is always a good idea to test the metal in advance of hanging a display.

    How to Place the Round ClikMagnet #20 onto the MagMover (+ extension pole) before Lifting to the Metal on the Ceiling.

    Choose by:

    1. The Round ClikMagnet #20 is designed with one centre ring.
    2. Position the Round ClikMagnet #20’s centre ring onto the MagMover’s post – as shown.
    3. This allows the Round ClikMagnet #20 (+ display) to be lifted to/attached to the ceiling metal.

    How To Safely Retrieve the Round ClikMagnet #20 (+ display) from the Ceiling.

    1. The corkscrew on the MagMover’s post (+ extension pole) is used to retrieve the ClikMagnet (+ display) from the ceiling.
    2. Rotate the corkscrew outward and insert it fully into the centre ring of the Round ClikMagnet #20 - as shown.
    3. Pull down.
    4. The coils of the corkscrew hold the Round ClikMagnet #20 (+ display) from falling.

    Question: If one Round ClikMagnet #20 will pull up to 20 lbs/9 kg, will two Round ClikMagnet #20 pull twice the weight?

    Answer: No. If one line is shorter than the other, the shorter line + 1 ClikMagnet will be holding the full weight of the display.

    • Caution: STRONG MAGNETS. Handle with care to avoid injury.
    • Keep all magnets away from credit cards, video tapes, computers and other electronic devices!
    • The Clik-Clik system is not recommended for use with S-hooks, as items may fall during takedown.
    • Do not swallow magnets.

    Customer Reviews

    Based on 4 reviews Write a review