1-866-298-9684 Questions? Call Us

One Button MagPole #11702

Item #11702
Extends from 4'6" to 8'.

Item #11702
Extends from 4'6" to 8'.

The One Button Pole is a sturdy 2 section, 1 push button telescopic extension pole with a fiberglass handle. The end tip has the Acme thread to fit into the MagMovers.

It closes to 4'6"/1.4m  and opens to 8'/2.4mUsing the reach of the body, the fully extended One Button Pole can meet the metal on ceilings with a height of 13'/3.9m.

Weight with shipping tube: (2.25 lb/1.02 kg)

$52 each
Quantity - +

Clik-Clik products to USA residents are only available through USA distributors.

View Our Distributor List

Tools to complete the Clik-Clik System

Clik Clik MagPole

What It Does

One Button Poles are push button telescopic extension poles with the standard Acme thread to fit into the MagMover. They are used to extend the reach of a person.

With the MagMover attached, the extended One Button Pole makes it easy to attach and remove ClikMagnets to/from ceiling heights not normally reached while standing on the floor.

How to Use the One Button Pole to Install Displays to the Metal on Ceilings

  1. With a MagMover threaded onto the end of the One Button Pole, hold the One Button Pole in a vertical position…with the base resting on the floor.
  2. Place the ClikMagnet(s) (+ display) onto the MagMover.
  3. While keeping the base on the floor and the One Button Pole vertical, extend the section to the desired height - as shown.
  4. Lift the One Button Pole (+ display) to allow the ClikMagnet(s) to ‘clik’ to the metal. Your display is hung!
  5. With the One Button Pole in a vertical position, set the base on the floor and gently close the opened section.
  6. Repeat for the next installation.
Clik-Clik How to Hold a MagPole
Magmovers Safely Remove ClikMagnets

How to Use the One Button Pole to Safely Retrieve Displays from the Ceiling.

  1. With a MagMover threaded onto the end of the One Button Pole, hold the One Button Pole in a vertical position…with the base resting on the floor.
  2. Rotate outward the MagMover’s corkscrews.
  3. While keeping the base on the floor and the One Button Pole vertical, extend the section to the desired height.
  4. Lift the One Button Pole and insert the corkscrew(s) fully into the ClikMagnet’s centre ring(s). Pull.
  5. With the One Button Pole, still in a vertical position, rest the base on the floor. Gently close the extended section. Your display is retrieved!
  6. Next: Remove the ClikMagnet(s) and their attached LoopLine from the display. These are ready to be re-used for the installation of the next display.

It is important to position yourself closely under the display when taking it down, this is the easiest way to retrieve a display - as shown.

How to Use the One Button Pole to Determine the Length of the Connecting Line between the Display and the ClikMagnet.

  1. With the One Button Pole in a vertical position, extend the pole to touch the ceiling. Hold at the ceiling.
  2. Visualize a spot on the One Button Pole where the top of your display would be, when hanging from the ceiling. Do not close the section.
  3. Return the base to the floor and gently lay the extended One Button Pole onto the floor.
  4. Using LoopLine measure the distance from the visualized spot, to the tip of the One Button Pole.
  5. This distance is the length of line required to hang your display at the desired position from the ceiling.
Clik-Clik Measuring LoopLine

How to hold a One Button Pole

Avoid power lines. Keep the One Button Pole a minimum of 10′ (3 m) away from any electrical wiring. Always use and hold the One Button Pole in a vertical position!

 

Welcome to Clik-Clik Systems

Select your region below to get started.

Canada United States
To purchase, choose a USA distributor.
International