- Description
- Safety
- Reviews
![](https://cdn.shopify.com/s/files/1/0367/6235/3800/t/3/assets/df6ad5c3449a--One-Button-01-f13a93.png?v=1587558521)
What It Does
One Button Poles are push button telescopic extension poles with the standard Acme thread to fit into the MagMover. They are used to extend the reach of a person.
With the MagMover attached, the extended One Button Pole makes it easy to attach and remove ClikMagnets to/from ceiling heights not normally reached while standing on the floor.
How to Use the One Button Pole to Install Displays to the Metal on Ceilings
- With a MagMover threaded onto the end of the One Button Pole, hold the One Button Pole in a vertical position…with the base resting on the floor.
- Place the ClikMagnet(s) (+ display) onto the MagMover.
- While keeping the base on the floor and the One Button Pole vertical, extend the section to the desired height - as shown.
- Lift the One Button Pole (+ display) to allow the ClikMagnet(s) to ‘clik’ to the metal. Your display is hung!
- With the One Button Pole in a vertical position, set the base on the floor and gently close the opened section.
- Repeat for the next installation.
![](https://cdn.shopify.com/s/files/1/0367/6235/3800/t/3/assets/df6ad5c3449a--One-Button-holding-01-387f00.png?v=1587558580)
![](https://cdn.shopify.com/s/files/1/0367/6235/3800/t/3/assets/df6ad5c3449a--One-Button-Positioning-01-e8a946.png?v=1587558600)
How to Use the One Button Pole to Safely Retrieve Displays from the Ceiling.
- With a MagMover threaded onto the end of the One Button Pole, hold the One Button Pole in a vertical position…with the base resting on the floor.
- Rotate outward the MagMover’s corkscrews.
- While keeping the base on the floor and the One Button Pole vertical, extend the section to the desired height.
- Lift the One Button Pole and insert the corkscrew(s) fully into the ClikMagnet’s centre ring(s). Pull.
- With the One Button Pole, still in a vertical position, rest the base on the floor. Gently close the extended section. Your display is retrieved!
- Next: Remove the ClikMagnet(s) and their attached LoopLine™ from the display. These are ready to be re-used for the installation of the next display.
It is important to position yourself closely under the display when taking it down, this is the easiest way to retrieve a display - as shown.
How to Use the One Button Pole to Determine the Length of the Connecting Line between the Display and the ClikMagnet.
- With the One Button Pole in a vertical position, extend the pole to touch the ceiling. Hold at the ceiling.
- Visualize a spot on the One Button Pole where the top of your display would be, when hanging from the ceiling. Do not close the section.
- Return the base to the floor and gently lay the extended One Button Pole onto the floor.
- Using LoopLine™ measure the distance from the visualized spot, to the tip of the One Button Pole.
- This distance is the length of line required to hang your display at the desired position from the ceiling.
![](https://cdn.shopify.com/s/files/1/0367/6235/3800/t/3/assets/df6ad5c3449a--Determining-Length-One-Button-01-5e545a.png?v=1587558620)
How to hold a One Button Pole
Avoid power lines. Keep the One Button Pole a minimum of 10′ (3 m) away from any electrical wiring. Always use and hold the One Button Pole in a vertical position!
Customer Reviews
Based on 6 reviews
Write a review