Round ClikMagnets #10

How to Choose the ClikMagnet for your Project:

Choose by:

1. Weight of the display to be hung.

Product Description:

• Plastic coated - no damage to ceilings.
• Re-usable – over and over again.
• Magnetic attraction is maintained over time. It does not lose power as a battery can.
• Removable from metal with a mechanical force.

Colour: White. For identification, there is a thin blue line around the magnet face (not visible when on the metal).

Important Factors

Three factors determine any magnet’s strength.

• Amount of iron in the metal.
• Direction of pull.
• Amount of paint, dirt or bumps etc. on the metal.

Note: It is always a good idea to test the metal in advance of hanging a display.

How to Place the Round ClikMagnet #10 onto the MagMover (+ extension pole) before Lifting to the Metal on the Ceiling.

Choose by:

1. The Round ClikMagnet #10 is designed with one centre ring.
2. Position the Round ClikMagnet #10’s centre ring onto the MagMover’s post – as shown.
3. This allows the Round ClikMagnet #10 (+ display) to be lifted to the metal within the FlatHat.

How To Safely Retrieve the Round ClikMagnet #10 (+ display) from the Ceiling.

1. The corkscrew on the MagMover’s post (+ extension pole) is used to retrieve the ClikMagnet (+ display) from the ceiling.
2. Rotate the corkscrew outward and insert it fully into the centre ring of the Round ClikMagnet #10 - as shown.
3. Pull down.
4. The coils of the corkscrew hold the Round ClikMagnet #10 (+ display) from falling.